103 Royalty-Free Audio Tracks for "Engine Idle"

Suzuki gixxer 150cc record with a soundedevices mixpre 3 96khz 32bit rode ntg2turn on and idle with some acceleration and turn off. Up close.

Stereo recording of a vintage race car. Engine starts and the engine revs.

Chevrolet lacetti 1. 4 getting keys, car start engine. Working idle. Interior recording. Recorded via tascam dr-100mkii.

Warbely alien engine idle sound. Made with by scraping a guitar string and then manipulating the sound.

Chevrolet lacetti 1. 4 getting keys, start car engine - turn off conditioner - working - stop engine. Interior recording. Recorded via tascam dr-100mkii.

Ford f350 highly modified diesel engine with after-market turbostarts, idles, revs some background talking/directingrecorded with marantz pmd660 & sennheiser e835 mic.

Just turning over the engine, letting it run for a moment, then switching off.

Ambience sound for the engine of a huge spaceship in deep space. Synthesized with vcv rack.

Recorded at tigre buenos aires argentina. Https://soundcloud. Com/wakerone.

Chevrolet lacetti 1. 4 car engine working-stop-start-working. Interior recording. Recorded via tascam dr-100mkii.

My 2002 mini cooper with a 1. 6l inline-4 engine at warm idle. Loops seamlessly. Recorded with a roland edirol r-09hr and edited in audacity. If you use this sample, please tell me what you did with it below! links are nice too.

Short recording of a car (specifically an suv, but could easily work for a sedan or light truck) driving in from a distance and parking. It idles briefly, and then turns off the engine. Also some light suburban neighborhood ambience (light wind, subtle traffic in the distance). Recorded with a sennheiser mkh-416 into a zoom f4 at 48khz, 24-bit.

A recording of a harley davidson sportster from about 25 years ago. Used re-20 mic running to a symentrix 528 mic pre. Includes engine starting and idling with occasional revs. Then the engine is shut off.

I turn my car key in the ignition slot, the engine starts to run. Recorded with edirol r-1 & sennheiser me66.

Recorded on a tascam portable recorder using the inbuilt condenser mics in an a/b pattern.

R44 idling then take off recorded on entry level point and shoot still cam.

Car drives up on a gravel road, stops and door opens, person steps out.

Ambience sound for the engine of a deep space station or huge spaceship. Synthesized with vcv rack.

Record at garage outside with mixpre3 and a rode ntg2 96khz 24bit. Close perspective and from various angles. Edit yourself for your desire outcome.

This is a motorcycle sitting at at stop light and then taking off. It is a harley davidson bike. Recorded in stereo with a sony pcm-d100.

Recording of a bus terminal outside our studio. Heavy traffic in the background, a bus arrives, staying idle with a running engine.

This sound was made inside audacity and mixed in magix music maker. Free to use for anything.

This sound is recorded directly from one of my original 1938 98cc light motorbikes. This time is a express (manufaturer) sl 102 (type). The noise you hear is all specific. It is the fuel cock on selection, the flooding of the carburettor, suction of the engine, two tries to bring the engine to live with clutch action inbetween. Running on idle and two short openings of the throttle. Engine is shut off by using the decompression lever which is typical for this period of time and two stroke engines. .

Recorded at a car park in front of a shopping mall. Another car is passing by very closely. Schoeps cmit5uzoom h6.

Purpose is space-ship idle background engine drone. Created in flstudio10.

This is the sound of a 98cc sachs engine of a 1938 light motorbike. It is one of the bikes in my private collection. The sounds reflect the fuel cock switching, flooding of the carburettor, sucking of the cylinder and two tries to bring the engine to life. The sound in between is the clutch lever. The engine is started by pedaling the bike on its stand. Main engine run features idle to half throttle open. The engine is eventually stopped by using the decompression lever which you can hear at the end. This is a true recording of the actual item.

A double csx engine, idling. . . As captured from the 8th floor of my very large, very concrete home. . . Via the builtin isight mic on my 2009 macbook.

Two jet engines panned left and right. Power up, idle, power down. Created in pd using the methods described by andy farnell, in his book "designing sound".

Purpose is space-ship idle background engine drone. Created in flstudio10 with vst-mysterion (free).

Four jet engines panned around the stereo field. Power up, idle, power down. Created in pd using the methods described by andy farnell, in his book "designing sound".

Interior driving sequence recorded with neumann kmr82i in passenger seat. Timed companion to exterior file.

Exterior driving sequence recorded with 2 em172s mounted on windshield. Timed companion to interior file.

This is a short clip of a chainsaw starting up, idling for a few seconds, then being revved up to cut a small log for a few more seconds before idling again. Contains idling and revving of a single-stroke engine. Recorded accidentally with an iphone in a pocket, so it's slightly muffled.

A sample from a quick flight that i took with a friend on september 8th, 2015. Audio was recorded with a zoom h5. You can hear the engine start, then we idle on the runway for a bit, and you'll hear us make a proper takeoff at about 13:30. After that it generally sounds the same. You'll hear when i crank the level down after takeoff, but you'll be able to easily compensate for it if you're serious about needing sustained flight noise for a small plane. The plane was a 1964 cessna 172e and were flying around vancouver, bc.

Created in flstudio 10. 9 using mysterion (free vst)purpose is space-ship idle background engine drone. Extended version (15sec) as requested ^_^.

The sound of a car engine idling i grabbed from an old video i recorded. It didn't perfectly loop so i copied the sound, reversed it, and put it after the original sound (making a ping pong effect).

Recorded with sony pcm-m10 with a shure sm-58 microphone in the engine compartment. Took a short drive, max speed aprox 50 km/h. Various sounds, idling, driving, acceleration.

Recorded with sony pcm-m10 with a shure sm-58 microphone in the engine compartment. Took a short drive, max speed aprox 50 km/h. Various sounds, idling, driving, acceleration.

Made a recording of my vw new beetle tdi for my podcast. Couldnt find what i needed anywhere so did it myself. Made with lexis audio editor on my samsung galxy s8. Enjoy!.

An piaggo ape`s engine idle. Recorded in maleshwaram, bangalore. Binaural recording with soundman okm`s and a h4n. If you want to support my work, please visit:jardinsonore(. )bandcamp(. )comthere you find a lot more.

Two contact microphones recording an engine from a mini cooper s in sport mode. Surprisingly aggressive-sounding. Intended to use for a race car asset. Contact microphones are stethoscope-like mics that you place onto a surface to record vibrations. This way, i was able to record the raw engine without wind or perspective. The left channel is the chassis and the right is the engine block. . . Blending the two together produces a great sound. Free to use.

Underhood recording of my renault 19 with oldish carburetted cleon engine (c2j). Double barrel webber 32 drt carb ~72ps engine. Start engine, tire skid, hard acceleration up to 6000 rpm and coast down to idle, several times. Throttle blips up to 7000 rpm. Mic: sony ecm-ds30p stereorecorder: sony mz-n707 mini disc, sp mode, agc: off. Wanted to test this cheap mic and custom made windscreen - this is my first car recording, and that's why i started with this cheap microphone, don't want to learn on expensive stuff. Still, i'm amazed how the recording turned out, it's $24 mic in not very silent area, yet it captured sound rather nicely. Windscreen (cost $0) turned out to be not that good :).

This is a clip of various engine sounds recorded on my 2003 subaru impreza wrx with a 3" turbo-back exhaust system. The audio starts with the engine at idle and includes a few engine revs at different rpms. You can hear some turbo whistling and also some rattling of god-knows-what parts. It's a little muffled (kind of a muddy sound), but could be used as part of an action sequence or with a music track laid over. As always, i love knowing how people use my tracks! i'd appreciate a comment letting me know what kind of project you're doing and, if possible, a link to any finished work! thanks.

This is a plasma pulse engine for spaceships, hover bikes/ boards, etc. The engine starts up at 00. 000 ms. Then stage one starts at 02. 400 ms. Stage two at 04. 800 ms. Stage three at 07. 200 ms. Stage four 09. 600 ms. Then the engine shuts down starting at 12. 000 ms. To change "gears" set position to the stage start then play. To "run" in each stage loop from start time +. 144 to stage end time(next stage start time) -. 083. You may have to figit the numbers. I haven't actually tested any of this. I don't really program any more. But, in theory it should work.

Recording of a diesel loc, part of a maintenance train, returning to depot at about 1am. Recorded from my bathroom window in cardiff east. Repetive sound, thythmic in nature but with a clear pitch. Occasional white noise from airbrakes. Recorded with zoom h2n, 44. 1/24.

Stereo recording of three linked diesel locomotives idling in the train yard. Captured at an angle to the lead engine, with the others muffled by work sheds. Recorded with a zoom h1, mastered in sound forge 5. Eq'ed to reduce low-end rumble and edited for easy looping.

A hyundai ix35 can be heard. It is started, runs a bit with isolated revs, and is turned off again. Before and after startup you can hear the car's control electronics. Feel free to use the sound; no attribution required. Feel free to write me in the comments what you used the sound for. Equipment:beyerdynamic mce 86 n(c)zoom h4n. File:wavmono48 khz24-bit.

It was time to mow the lawn, and it was a beautiful day for mowing. 80 degrees and sunny. Not much breeze at all. For the production: i took the zoom h1 out and set it by the porch about 2 feet up off the ground. Recorded at 96k 24bit. The low cut and agc were disabled. Once recorded, i finished it off with a small amount of airwindows "air" with the 22k tap opened all the way up. For the mower: i used a 21 inch 140 cc "550ex" series briggs & stratton gas walk behind push mower. When i finished mowing my yard, i approached the recorder up to about 2 feet, then i cut the engine. I start it again and let it idle in close proximity for about 8 seconds, still at a distance of about 2 feet, then cut the engine one last time. I'm sure this could potentially come in handy for those outdoor scenes where you could use some distant neighborhood activity or a close-up start/stop. Enjoy!.

Diesel engine starts, idles, then revvs gently before being switched off again.

Small honda engine on wood splitter idles. Tascam dr-40.